Allen-Bradley罗克韦尔伺服电机MPL-A1510V-EJ72AA

   今天，Rockwell自动化在中国是自动控制、传动系统产品和解决方案的领先供应商。
公司品种繁多的产品、服务和解决方案，为终端用户、系统集成商和OEM铺设了一条成功之路，
使他们除了达到具体的商务目标外，还得以提高竞争优势。
The Allen-Bradley MP-Series
Low-Inertia, high-output brushless
servo motors use innovative design
characteristics to reduce motor size
while delivering signifi cantly higher
torque. These compact and highly
dynamic brushless servo motors from
Rockwell Automation are designed to
meet the demanding requirements of
high-performance motion systems.
This series of servo motors is typically
used with the Allen-Bradley Kinetix
6000, Kinetix 6200, Kinetix 6500,
Kinetix 300, and Kinetix 350 servo drive
families. Available in nine frame sizes,
these motors provide continuous stall
torque from 0.26 to 163 Nm (2.3-1440
lb-in.) and peak torque from 0.77 to
278 Nm (6.8-2460 lb-in.)
MP-Series Low-Inertia
Motors Provide:
 Innovative winding technology yields
up to 40% higher torque per unit size
than conventional servo motors
 Improved winding insulation material
for enhanced thermal management
and heat transfer, resulting in
higher performance
 High-energy rare-earth magnets for
quicker acceleration
 New SpeedTEC DIN connectors allow
fl exible orientation of connectors and
use of a single cable family with all
MP-Series motors
 Integral 24-volt brake option
 Broad torque range – all within one
motor family
 Optional Shaft Seal for IP 66
environmental rating
 Standard IEC 72-1 mounting dimensions
 Operating temperature range: 0 - 40o C
(32 - 104o F)
 The MP-Series Low-Inertia Motors are UL
recognized components to applicable
UL and CSA standards and CE marked
for all applicable directives.

伺服电机的特点：

1、精度:实现了位置，速度和力矩的闭环控制;克服了步进电机失步的问题;
2、转速:高速性能好，一般额定转速能达到2000~3000转;
3、适应性:抗过载能力强，能承受三倍于额定转矩的负载，对有瞬间负载波动和要求快速起动的场合特别适用;
4、稳定:低速运行平稳，低速运行时不会产生类似于步进电机的步进运行现象。适用于有高速响应要求的场合;
5、及时性:电机加减速的动态相应时间短，一般在几十毫秒之内;
6、舒适性:发热和噪音明显降低。
 Allen-Bradley(AB ):
运动控制
执行器
驱动器，伺服
编码器
运动软件
电机，伺服
MPL——低惯性无刷电机产品,460 V,帧尺寸3 = 100毫米(3.94英寸),堆栈长度20 = 50.8毫米(2.0英寸),5000 RPM,多向高清编码器(绝对的反馈)。键轴扩展,SpeedTEC DIN连接器,直角,180°旋转(快速连接),没有刹车,IEC标准,免费安装孔(FF)型。

低惯量驱动器和马达伺服马达，旋转，低惯量，IEC,240V交流，大转速8000转，0.26 N-M,1/4转直角可旋转DIN连接器，2000线/转增量编码器反馈，无刹车，63毫米螺栓圆形公制法兰安装，键轴，标准。
MPL-A1510V-EJ72AA
MPL-A1510V-EJ74AA
MPL-A1510V-HJ72AA
MPL-A1510V-HJ74AA
MPL-A1510V-VJ72AA
MPL-A1510V-VJ74AA